IEA Clean Coal Centre

NOx emissions abatement and control by primary measures

Emissions of NOx can be either abated or controlled by primary measures or flue gas treatment technologies. Primary measures for NOx control may be divided into the following categories:

Burner optimisation techniques and low NOx burners are used to minimise the formation of NOx during combustion. In air staging and flue gas recirculation technologies, the aim is to reduce the oxygen availability to help reduce NOx formation and complete the combustion. In fuel staging, previously formed NOx is reduced to nitrogen and oxygen within the furnace (Soud and Fukasawa, 1996).

Primary measures for NOx control (burner optimisation, low NOx burners and overfire air) are now considered integral parts of a newly built power plant and existing units retrofit them whenever they are required to reduce their NOx emissions. SCR is accepted throughout the world as the proven commercial option to achieve high NOx removal. However, new developments in primary measures, such as application of the reburning process at large scale, advanced reburning as well as post-combustion flue gas treatment such as SNCR and combined SO2/NOx control systems should offer alternatives to SCR in the future.


Information or material of the Technology Collaboration Programme (TCP) on Clean Coal Centre (CCC TCP) (formally organised under the auspices of the Implementing Agreement for the IEA Clean Coal Centre), does not necessarily represent the views or policies of the IEA Secretariat or of the IEA’s individual Member countries. The IEA does not make any representation or warranty (express or implied) in respect of such information (including as to its completeness, accuracy or non-infringement) and shall not be held liable for any use of, or reliance on, such information.

IEA Clean Coal Centre,  Apsley House, Third Floor, 176 Upper Richmond Road, London, SW15 2SH.  United Kingdom
Tel +44 (0)20 3905 3870