IEA Clean Coal Centre

Regenerable processes for SO2 control

In regenerable processes, the sorbent is regenerated chemically or thermally and re-used. Elemental sulphur or sulphuric acid is recovered from the SO2 removed. The revenue from these by-products can compensate partially for the higher capital costs required in such FGD systems. Regenerable processes generally require no waste disposal, produce little waste water and have low sorbent make-up requirements. However, in most such systems, a prescrubber is essential to control chlorides. Although these processes can achieve high SO2 removal efficiencies (>95%) they have in general high capital costs and power consumption.

Click on the relevant text below for other FGD technologies:

 IE ETN

 
Information or material of the Technology Collaboration Programme (TCP) on Clean Coal Centre (CCC TCP) (formally organised under the auspices of the Implementing Agreement for the IEA Clean Coal Centre), does not necessarily represent the views or policies of the IEA Secretariat or of the IEA’s individual Member countries. The IEA does not make any representation or warranty (express or implied) in respect of such information (including as to its completeness, accuracy or non-infringement) and shall not be held liable for any use of, or reliance on, such information.

 
IEA Clean Coal Centre,  Apsley House, Third Floor, 176 Upper Richmond Road, London, SW15 2SH.  United Kingdom
Tel +44 (0)20 3905 3870  mail@iea-coal.org sales@iea-coal.org